ಟೆಂಪ್ಲೇಟು:Infobox dam/doc
This is a documentation subpage for ಟೆಂಪ್ಲೇಟು:Infobox dam. It may contain usage information, categories and other content that is not part of the original ಟೆಂಪ್ಲೇಟು page. |
Usage ಬದಲಾಯಿಸಿ
Use the following infobox for all types of hydroelectric power stations involving dams. For all types of pumped-storage, wave, and tidal power stations, please use {{Infobox power station}}
.
{{{name}}} | |
---|---|
ಅಧಿಕೃತ ಹೆಸರು | {{{name_official}}} |
ದೇಶ | {{{country}}} |
ಸ್ಥಳ | {{{location}}} |
ಅಕ್ಷಾಂಶ ರೇಖಾಂಶ | 0°0′0″N 0°0′0″E / 0.00000°N 0.00000°E |
ಉದ್ದೇಶ | {{{purpose}}} |
ಸ್ಥಿತಿ | {{{status}}} |
ಕಟ್ಟುವಿಕೆ ಪ್ರಾರಂಭ | {{{construction_began}}} |
ಉದ್ಘಾಟನಾ ದಿನಾಂಕ | {{{opening}}} |
Demolition date | {{{demolished}}} |
ತಯಾರಿಕೆಯ ವೆಚ್ಚ | {{{cost}}} |
ಯಜಮಾನ್ಯ | {{{owner}}} |
Operator(s) | {{{operator}}} |
Dam and spillways | |
Type of dam | {{{dam_type}}} |
ಇಂಪೌಂಡ್ಸ್ | {{{dam_crosses}}} |
ಎತ್ತರ (ಅಡಿಪಾಯ) | {{{dam_height_foundation}}} |
Height (thalweg) | {{{dam_height_thalweg}}} |
ಉದ್ದ | {{{dam_length}}} |
Elevation at crest | {{{dam_elevation_crest}}} |
Width (crest) | {{{dam_width_crest}}} |
Width (base) | {{{dam_width_base}}} |
Dam volume | {{{dam_volume}}} |
ಸ್ಪಿಲ್ವೇಸ್ | {{{spillway_count}}} |
Spillway type | {{{spillway_type}}} |
Spillway capacity | {{{spillway_capacity}}} |
Reservoir | |
ರಚಿಸುವಿಕೆ | {{{res_name}}} |
ಒಟ್ಟು ಸಾಮರ್ಥ್ಯ | {{{res_capacity_total}}} |
Active capacity | {{{res_capacity_active}}} |
ನಿಷ್ಕ್ರಿಯ ಸಾಮರ್ಥ್ಯ | {{{res_capacity_inactive}}} |
ಸಂಗ್ರಹಣಾ ಪ್ರದೇಶ | {{{res_catchment}}} |
Surface area | {{{res_surface}}} |
Max. length | {{{res_max_length}}} |
Max. width | {{{res_max_width}}} |
Max. water depth | {{{res_max_depth}}} |
ಸಾಮಾನ್ಯ ಎತ್ತರ | {{{res_elevation}}} |
Tidal range | {{{res_tidal_range}}} |
Power station | |
Name | {{{plant_name}}} |
Coordinates | 1°1′1″N 1°1′1″E / 1.01694°N 1.01694°E |
Operator(s) | {{{plant_operator}}} |
Commission date | {{{plant_commission}}} |
Decommission date | {{{plant_decommission}}} |
Type | {{{plant_type}}} |
Hydraulic head | {{{plant_hydraulic_head}}} |
Turbines | {{{plant_turbines}}} |
Installed capacity | {{{plant_capacity}}} |
Annual generation | {{{plant_annual_gen}}} |
Website {{{website}}} | |
{{{extra}}} |
{{Infobox dam | name = | name_official = | image = | image_size = | image_caption = | image_alt = | location_map = | location_map_size = | location_map_caption = | location_map_alt = | lat_d = | lat_m = | lat_s = | lat_NS = | long_d = | long_m = | long_s = | long_EW = | coordinates_type = type:landmark | coordinates_display = inline,title | country = | location = | purpose = | status = | construction_began = | opening = | demolished = | cost = | owner = | operator = | dam_type = | dam_crosses = | dam_height = | dam_height_foundation= | dam_height_thalweg = | dam_length = | dam_elevation_crest = | dam_width_crest = | dam_width_base = | dam_volume = | spillway_count = | spillway_type = | spillway_capacity = | res_name = | res_capacity_total = | res_capacity_active = | res_capacity_inactive= | res_catchment = | res_surface = | res_max_length = | res_max_width = | res_max_depth = | res_elevation = | res_tidal_range = | plant_name = | plant_lat_d = | plant_lat_m = | plant_lat_s = | plant_lat_NS = | plant_long_d = | plant_long_m = | plant_long_s = | plant_long_EW = | plant_operator = | plant_commission = | plant_decommission = | plant_type = | plant_hydraulic_head = | plant_turbines = | plant_capacity = | plant_annual_gen = | website = | extra = }}
Parameter names and descriptions ಬದಲಾಯಿಸಿ
Parameter name | Description |
---|---|
name | Name of dam. |
name_official | Official name, if different from name. Preferably in native language. |
image | Image filename, without File: parameter. Animated (.gif) and media files (.ogv) are also allowed. |
image_size | Value to overrides the default 250px. |
image_caption | Caption beneath image. |
image_alt | Alternative text for image. |
location_map | Name of a location map file. The coordinates must be specified as well (see below). |
location_map_size | Value to overrides the default 250px. |
location_map_caption | Caption beneath location map. |
location_map_alt | Alternative text for location map. |
lat_d | Latitude degrees. |
lat_m | Latitude minutes. Omit or leave blank if lat_d is in decimal format. |
lat_s | Latitude seconds. Omit or leave blank if lat_d is in decimal format. Remember to avoid being overly precise. |
lat_NS | Northern or Southern latitude (enter N or S ). Omit or leave blank if lat_d is in decimal format.
|
long_d | Longitude degrees. |
long_m | Longitude minutes. Omit or leave blank if long_d is in decimal format. |
long_s | Longitude seconds. Omit or leave blank if long_d is in decimal format. Remember to avoid being overly precise. |
long_EW | Longitude East or West (enter E or W ). Omit or leave blank if long_d is in decimal format.
|
coordinates_type | Optional parameter to add additional coordinate functions. See here for more details. |
coordinates_display | Display the coordinates inline or title, or both as inline,title. |
country | Country where the facility is located. Do not use flag icons. |
location | General area where located. Avoid being overly-detailed. |
purpose | Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes, consider using: Multi-purpose. Field codes: F =Flood control, I =Irrigation, N =Navigation, P =Power.
|
status | Current status of the project. Enter any one of the following auto-expanding fields: D =Decommissioned, O =Operational, P =Proposed, UC =Under construction.
|
construction_began | Date construction began, consider using {{Start date}} .
|
opening | Date, or future date, of inauguration. Consider using {{Start date}} .
|
demolished | Date of demolition (i.e removal or destruction of dam). Consider using {{End date}} .
|
cost | Total cost of development. |
owner | Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible. Example: Owner1: 60% <br/>Owner2: 40%
|
operator | Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam. |
dam_type | Type of dam. Enter any one of the following auto-expanding fields: A =Arch dam, B =Barrage, E =Embankment dam, F =Earth-fill dam, G =Gravity dam, AG =Arch-gravity dam.
|
dam_crosses | Body of river or stream below dam |
dam_height | Height of dam. Depreciated parameter; use only if dam_height_foundation or dam_height_thalweg is not known.
|
dam_height_foundation | Height over foundation bed, with metric conversions. |
dam_height_thalweg | Height over thalweg (riverbed), with metric conversions. |
dam_length | Length of dam crown, with metric conversions. |
dam_elevation_crest | Height of the dam's crest above sea level, with metric conversions. |
dam_width_crest | Width at crest of dam, with metric conversions. |
dam_width_base | Width at base of dam, with metric conversions. |
dam_volume | Volume of material in the dam structure. |
spillway_count | Number of spillways. |
spillway_type | Type of spillway. |
spillway_capacity | Capacity of spillway. |
res_name | Name of upstream body of water, if different than "dam_crosses". |
res_capacity_total | Capacity of reservoir, i.e. megalitres. |
res_capacity_active | The active, live or useful capacity (storage) of the reservoir. |
res_capacity_inactive | The inactive or dead capacity (storage) of the reservoir. |
res_catchment | Area of catchment for reservoir. |
res_surface | Surface area (top water level) of reservoir. |
res_max_length | Length of the reservoir at normal levels, with metric conversions. |
res_max_width | Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions. |
res_max_depth | Maximum water depth of reservoir. |
res_elevation | The reservoir's height above sea level at normal levels, ith metric conversions. |
res_tidal_range | Tidal range, if applicable. |
plant_name | Name of plant, if applicable. |
plant_operator | Operator(s) of the hydroelectric power plant. |
plant_lat_d | Latitude degrees. |
plant_lat_m | Latitude minutes. Omit or leave blank if lat_d is in decimal format. |
plant_lat_s | Latitude seconds. Omit or leave blank if lat_d is in decimal format. Remember to avoid being overly precise. |
plant_lat_NS | Northern or Southern latitude (enter N or S ). Omit or leave blank if lat_d is in decimal format.
|
plant_long_d | Longitude degrees. |
plant_long_m | Longitude minutes. Omit or leave blank if long_d is in decimal format. |
plant_long_s | Longitude seconds. Omit or leave blank if long_d is in decimal format. Remember to avoid being overly precise. |
plant_long_EW | Longitude East or West (enter E or W ). Omit or leave blank if long_d is in decimal format.
|
plant_commission | Power plant commissioning date. May be different than dam opening date. |
plant_decommission | Power plant decommissioning date. May be different than dam closing date. |
plant_type | Type of hydroelectric power station. Enter any one of the following auto-expanding fields: C =Conventional, P =Pumped-storage, R =Run-of-the-river, T =Tidal barrage.
|
plant_hydraulic_head | Hydraulic head at power station. |
plant_turbines | Number of turbines, with respective rated capacity. |
plant_capacity | Installed generation capacity, measured in megawatts (MW). |
plant_annual_gen | Average annual power generation of the previous year. Measured in gigawatt-hours (GWh) |
website | Raw wikitext for entering website(s). Use [brackets] where appropriate |
extras | Free form, spans both columns. Use sparingly. |
Coordinates ಬದಲಾಯಿಸಿ
The coordinates can be specified using one of three different methods
- lat_d, lat_m, lat_s, lat_NS, long_d, long_m, long_s, long_EW – For DMS style coordinates which can be used specify the pushpin in a
{{Location map}}
. - lat_d and long_d – for decimal style coordinates which can be used to specify the pushpin in a
{{Location map}}
. - coordinates – with a
{{Coord}}
template which cannot be used with the{{Location map}}
.
See Wikipedia:WikiProject Geographical coordinates#Parameters for more details about setting the coordinates_type.
Microformat ಬದಲಾಯಿಸಿ
The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
Sub-templates ಬದಲಾಯಿಸಿ
If the place or venue has "established", "founded", "opened" or similar dates, use {{Start date}}
for the earliest of those dates unless the date is before 1583 CE.
If it has a URL, use {{URL}}
.
Please do not remove instances of these sub-templates.
Classes ಬದಲಾಯಿಸಿ
hCard uses HTML classes including:
- adr
- agent
- category
- county-name
- extended-address
- fn
- label
- locality
- nickname
- note
- org
- region
- street-address
- uid
- url
- vcard
Geo is produced by calling {{Coord}}
, and uses HTML classes:
- geo
- latitude
- longitude
Please do not rename or remove these classes nor collapse nested elements which use them.
Precision ಬದಲಾಯಿಸಿ
When giving coordinates, please use an appropriate level of precision. Do not use {{Coord}}
's |name=
parameter.
See also ಬದಲಾಯಿಸಿ